The Twin Power Xd Re-Writes The Rule Book And Is The Most Powerful Model In The Magnumlite Series. Designed For The Inshore Saltwater Angler. It Is At Equally At Home Fishing For Large Predators In Freshwater Thanks To Its Sensitivity And Super Fast Rotation.The Ultra-Light, Fast-Response Mgl Rotor Provides Precise Lure Control, While Hagane Gear And Aluminium Body Provide Durability For Relentless Cranking Power.The Addition Of Micromodule Ii And Silent Drive Further Enhances The Smoothness And Fishing Experience.Add To That The Internal Protection From Saltwater With X Protect, Plus Superior Casting Performance From The Long Stroke Spool Design And You Have The Perfect Strong, Lightweight And Durable Reel For The Serious Saltwater Angler.

ClASSIFICATION	Shore & Boat Casting
COMPATIBLE	Fresh & Saltwater Fishing
BEARINGS	10+1
GEAR RATIO	6.2
LINE CAPACITY/BRAID LB/YDS	15/230; 30/180; 50/120
LINE CAPACITY/BRAID PE# (PE# No/M)	1/490; 1.5/320; 2/240
MONO CAPACITY LB/YDS	10/200; 12/160
LINE CAPACITY (MM/M)	0.25/260; 0.30/180; 0.35/130
SPARE SPOOL	Not Available
REEL SPOOL MATERIAL	Aluminium
BODY MATERIAL	Ci4+; Highly Technical Carbon Material
MAX DRAG/LB	24
MAX DRAG/KG	11
LINE RETRIEVE/INCHES	40
LINE RETRIEVE/CM	101.6
REEL HAND POSITION	Interchangeable Right/Lift
HANDLE KNOB SPECIFICATIONS	Screw In Machined Alu Single Handle
REEL COLOR	Navy Blue/Silver
REEL WEIGHT/oz	8.6
REEL WEIGHT/G	245

HAGANE
HAGANE is a Shimano reel design concept created to withstand continual use and extreme abuse. HAGANE is an innovation with built-in toughness and durability that works alongside Shimano's precision engineering. HAGANE is for all anglers.

HAGANE Gear
With amazing strength and durability, the HAGANE Gear is at the very heart of most Shimano reels. Shimano, through the application of state-of-the-art technologies, gives anglers the long-lasting smoothness and pleasure that is felt when anglers first use a reel, over and over again. No cutting work is applied to the teeth of the drive gear during fabrication, instead, the entire surface is calculated in minute detail by special 3D design and then formed by Shimano's cold-forging technology. The result is assured resilience. HAGANE Gear is the fruit of Shimano's inexhaustible pursuit for durability — the strength and power of forged metal continues to represent the fundamental concept of Shimano reels.

HAGANE Body
The HAGANE Body is a metal reel body with high rigidity. The body rigidity and impact resistance virtually eliminates body flexing on the reel while fighting fish. The result transforms the angler's actions directly into cranking power, increasing efficiency through strength.

X-Ship
X-Ship provides improved gear durability. By supporting the pinion gear on both ends with bearings, the pinion gear maintains precise alignment with the drive gear. This allows the gears to stay in the same position under the heaviest loads. The added benefit of X-Ship technology is that friction between the spool shaft and gear is eliminated. This further benefits anglers with enhanced casting performance and casting distance of lighter lures.

X-Shield
By providing dependable sealing structures and gaskets at 12 critical locations throughout the reel body, Shimano is able to create a water-resistant structure that is highly reliable and durable while ensuring that it can hold up when used in extreme saltwater conditions.

X PROTECT (Spinning)
For medium and small general-purpose spinning reels, which require lighter spinning, we focused on a non-contact structure that does not compromise the lightness of the spinning. In addition to conventional water-repellent treatment, a labyrinth structure that suppresses water penetration is combined to achieve high water-resistant performance despite the non-contact nature of the structure. It is used in the stopper bearing section and line roller section.

X-Tough Drag
X-Tough Drag features dramatically enhanced smoothness, control, and toughness to anticipate the vigorous speed of bluefin tuna and giant trevally. X-Tough Drag further improves heat resistance and durability with construction that incorporates metal-only drag washers and abrasion-resistant carbon washers, as well as increased stability by supporting the spool from both the top and bottom.

AR-C Spool
Shimano AR-C Spool is a patented spool design with an angled spool lip. This design enables the line to leave the spool with less friction and in smaller coils, resulting in longer, more accurate casts. AR-C spools are proven to reduce backlash and wind knots when using braid. AR-C spools are now standard on almost all Shimano reels.

Rigid Support Drag
By strengthening the spool support of the main shaft, the play and fluctuation of the spool during drag operation are suppressed. The Rigid Support Drag allows smooth and consistent drag delivery, even under high load.

Cross Carbon Drag
The Cross Carbon Drag material provides a wider range of drag settings compared to traditional drag materials. The Cross Carbon Drag provides the smoothest Shimano drag performance ever while providing anglers with increased durability.

S A-RB
S A-RB bearings are put through the same process as Shimano’s A-RB bearings but feature shields on both sides of the bearings. These shields reduce the possibility of salt or sand inhibiting the rotation of the bearing.

One-Piece Bail
One-Piece Bail allows the line to travel unimpeded to the line roller. The seamless design reduces friction and decreases the chance of tangles or the line catching on the bail arm.

Infinity Drive (Spinning)
The Infinity Drive structure is an advanced structure that creates exceptionally light winding. The main shaft, which had previously been supported by the pinion gear, is now supported by a new and unique low-friction bushing that significantly decreases frictional resistance. In addition, the main shaft has undergone a proprietary surface treatment and special processing to drastically reduce rotational torque, constructing a reel that can actively wind even under heavy loads.

SilentDrive
SilentDrive technology benefits from a total redesign of all functional parts focused on the drive gear, worm shaft, and other parts. The goal: remove unnecessary noise and vibration. In doing so, the overall tolerances are improved to a micron level, ultimately creating an overall quieter and smoother reel operation.

Heatsink Drag
The Heatsink Drag is a revolutionary structure located at the bottom of the spool that helps achieve overwhelming drag performance and improved durability. The Heatsink Drag dissipates heat outside of the spool by about 50% to reduce the drag-force drop that is caused by friction and heat. To further improve performance, the Heat Insulation Sheet dampens the heat flowing to the line on the spool and reduces line temperature by 30% for increased dependability during long fights.